Beginners Golf Clubs

Beginners Golf Clubs Buying Guide

Beginners Golf Clubs

Beginners Golf Clubs

 

 

When shopping for Beginners golf clubs, the wide range and variety of technologies and price points can be confusing. Should you choose graphite or steel? Fairway woods or hybrid clubs? We cover all that and more in this guide, along with information on club types, loft, shaft flex and conversion between irons or fairway woods and hybrid clubs.

Before we get into all that, there are a few basics you should know when shopping for Beginners golf clubs:

 

Choosing the Right Beginners Golf Clubs: Loft and Shaft

 

What is the “loft” of a golf club?

The angle of the face of the club with respect to the shaft is called loft. Drivers, 2 and 3 irons have very little loft. Wedges, and short irons have considerable loft by design.And, as your intuition tells you, the lower the angle of loft, the lower the golf ball’s trajectory, and the farther the golf ball’s flight. In contrast, the higher the loft angle, the higher the golf ball’s trajectory and the shorter the golf ball’s flight. Loft angles are expressed in degrees with respect to vertical rather than the ground. A high-lofted club, such as a sand wedge would have a loft somewhere about 56-degrees. Lob wedges can go as high as 64-degrees. But that’s about the practical limit for a club. You only need about 60-degrees to make a perfect flop shot.

Beginners Golf Clubs

Loft

 

The angle between the club face and the shaft is the loft angle of a golf club.

 

 

 

 

 

 

 

 

 

 

The chart below illustrates industry standards for golf club loft angle.

Beginners Golf Clubs

Standards for golf club loft angle

 

How to choose the right flex for your golf clubs?

All low handicappers and golfers who are serious about shooting the lowest scores possible consider flex in their clubs. It makes the science of hitting the ball so much easier, which translates to more enjoyment on the course. Now, when I say “flex”, I am referring to the ability of a golf shaft to bend as forces are applied to it during the golf swing. Just go ahead and “waggle” your club a little and see how much the shaft bends and you will get an idea of what “flex” is.

Shaft flex is categorized according to swing speeds, from slowest to fastest, in this order:

Ladies = slowest swing speed
Senior  = slower swing speed
Regular  = average swing speed
Stiff  = fast swing speed
Extra Stiff = fastest swing speed

      Selecting the Proper Shafts

When it comes to selecting shafts for your beginners golf clubs there are three main things to keep in mind, the type of shaft, the weight of the shaft and the flexibility.

      Steel vs Graphite

Steel shafts are usually preferred by better players for a few reasons. Steel shafts tend to be heavier than
graphite shafts and this can the speed the player swings the golf club.

The better players are usually able to produce enough swing speed to not have to worry about the weight of the club. The steel shafts will also produce more feedback to the golfers hands when the ball is struck at impact allowing them to “feel” how the shot was hit and to help them make any corrections should there be a need.

Graphite shafts are usually lighter than steel shafts and thus allow slower swinging players to increase their swing speed. This is a big advantage for beginners, ladies, and senior players, helping them to hit the ball further with their drivers. Graphite also is more forgiving with regard to vibrations to the players hands when a poor shot is struck. You don’t feel as much of a sting from a slightly mishit shot.Graphite shafts is recommended for beginners golf clubs.

Recommend Complete club set for beginner  Click Here!

 

Choosing the Right Beginners Golf Club: Types and Materials

 

Driver

The first thing to consider is size. Many models are offered at the USGA’s legal limit for clubhead volume size (460cc). The larger head size results in a larger “sweet spot,” which promotes improved consistency for many average players. Smaller driver heads (around 380cc-410cc) allow better players with repeatable swings more control.

Golf club designers continue to design clubs with internal and external weighting to help golfers hit a fade or draw or adjust ball flight higher and lower. Whether you prefer weight screws, lightweight carbon crowns or unique head shapes, there is a high-performance driver to fit your game.

beginners golf clubs

Driver

      Driver Materials

Steel: Drivers with a steel head are somewhat more affordable than titanium drivers, but are also heavier and less forgiving, due to the smaller head size. Steel drivers offer a more traditional look and feel, and are extremely durable and solid.

Titanium: The biggest innovation in golf technology in recent years is the development of the titanium driver. The material’s high strength-to-weight ratio, combined with a larger head and sweet spot, make this a very playable, forgiving choice if you can afford the price tag.

Composite: Composite drivers combine non-metal materials, such as carbon, with titanium components
throughout the club. The intent of the carbon is to further reduce the weight of the club, thus increasing swing speed and, ideally, distance.

Recommended Driver for beginner Click Here!

 

Fairway Woods

With so much emphasis put on selecting the best driver these days, many new golfers are surprised to learn that picking out the right fairway woods can be just as, if not more, important. The type and variety, of woods ideal for you varies based on the kind of player you are, and what you want to get out of the clubs.

Beginners Golf clubs

Fairway Wood

2-to-4-woods: Tee shot alternatives to your driver or long irons, and also handy from the fairway, these woods have a smaller head and shaft, allowing for a shorter, more controllable shot.

5-to-11-woods: Either replacing or assisting your longer irons, these woods offer solid contact and greater flight than long irons, ideal for shots that require a lot of arc on the ball’s trajectory.

Sets: One advantage of a full set of fairway woods is the consistent feel throughout the range of clubs. A
common combination that makes up a manufacturer set includes 3, 4, 5, and 7 woods, and this option is
sometimes preferable for players who are new to the game, or seeking maximum value for their dollar.

      Club Head Materials

Steel: Most woods today utilize a steel head. Since these clubs’ heads need not be large, steel provides a
strong, forgiving shot, with a reasonable weight.

Titanium: Some manufacturers use titanium in fairway woods, as the lighter, thinner face allows for center of gravity to be moved lower, wider, and further back, to boost height on your shots. Not surprisingly, titanium fairway woods are more expensive than steel.

Composite: Though somewhat rare, composite woods are slowly becoming more common, and offer the same benefits as composite drivers–reduced weight at a price that’s more affordable than titanium.

      Shaft Materials

Steel: Steel fairway wood shafts offer optimal control via a solid, consistent feel that’s similar to an iron.

Graphite: This more expensive option boasts a range of flexes to suit your game, and can add distance to your shot.

Recommended Fairway woods for beginner Click Here!

 

beginners golf clubs

Hybrids

Hybrids

These newer style heads are becoming more common these days, as sets are increasingly combining hybrids with the lower numbered irons. They are made more like a fairway wood head in that a face is welded onto a hollow shaped head. By replacing the traditionally harder to hit longer irons these sets can offer golfers new choices to help improve their games.Hybrids is recommended for beginners golf clubs.

 

 

Recommended Club Set for beginner  Click Here!

 

Irons

The golf clubs or irons are traditionally known as the unrecognized heroes in a golfer’s bag. They are the
scoring clubs and the most used clubs in the golf arsenal. They come in sets of up to 13 clubs with all different loft angles for different distances and shots.There are two main types of irons that are available to the players today, with a third type starting to also be introduced more and more.

Beginners Golf Clubs

Irons

      Forged Irons

Forged clubs are often made of softer carbon steel with an exterior chrome plating. Advanced and more
experienced players often prefer these type of clubs for greater feel and control of the ball. The process involves a heavy air powered hammer that shapes a piece of steel into the rough head.The process is then repeated, and then the head is ground, polished, markings engraved etc. It is more expensive than casting due to the equipment needed. Forged iron heads come in the shape of blades (or “musclebacks”), and usually the smaller cavity back designs (“players cavity”).

      Cast Irons

Such golf clubs are usually cast from a mould, and usually of harder metals than forged clubs (more often than not of stainless steel). A master head is made, a mould is made from that and then the molten steel is poured into the mould. After removal of the ceramic mould, the heads are then ground, shaped, badged or engraved.

These by far,make up a great majority of the iron heads made today due to the lower price and ease of
production

      Design

Blade: A small hitting area and thin clubhead, with weight evenly distributed throughout, produce a small sweet spot in the center of the head. The benefit is that center shots produce a long, straight trajectory. The tradeoff is that mis-hits are shorter and unpredictable.

Cavity Back: Also known as perimeter weighted, this type of iron is made from stainless steel, which distributes weight around the edge of the head, for an increased sweet spot and greater forgiveness. The inverse of a blade iron, these clubs offer reduced feel and distance, but more playability.

Hybrid Sets: Designed specifically for players who struggle to hit longer irons, hybrids progress through the range from cavity back short irons to hollow back mid irons and finally to wood-and-iron combination longer clubs. The variety of design allows players to benefit from a combination of the features outlined above.

      Shaft Material

Steel: Carbon steel or stainless steel material is thick, with consistent flex throughout the entire range of clubs. As with any steel component club, they’re also more affordable.

Graphite: Lighter weight material enables faster swing speeds from your irons, which often leads to longer shots. Feel on your shots suffers somewhat, and it’s a more expensive option. Players with slower swing speeds, however, can benefit from this option.Graphite shaft is recommended for beginners golf clubs

Multi-Material: Both steel and graphite are combined in one shaft, typically in a primarily steel shaft with a graphite tip. The solid feel of a steel shaft is accented by the ability to put added power into the ball via the graphite material, which also helps dampen vibrations.

Recommended Iron Set for beginner Click Here!

 

Wedges

As a beginner, you will not need to concern yourself too much with wedges other than the pitching wedge. Gap and lob wedges are common in the bags of better players, and sand wedges are fairly common for all players.

But beginners should not feel obligated to pick up a sand wedge right off the bat. These are specialized clubs for specialized uses, remember, and you’ll want to learn how to use the more basic beginners golf clubs first.

Beginners Golf Clubs

Wedges

Wedges feature the shortest shafts and highest lofts of any beginners golf clubs. In fact, wedges are often identified by their loft rather than their name. A lob wedge might instead be called a “60-degree wedge,” for example.

Sand wedges were invented to make shots out of sand bunkers easier (although many amateurs find sand shots to be very difficult, a sand shot is among the easiest shots in golf for accomplished players). The typical sand wedge might have a loft around 56 degrees.

A typical lob wedge might have a loft of 60 degrees. As its name implies, a lob wedge allows a player to “lob” the ball high into the air, from where it will drop steeply down onto the green, with little or no roll.

With pitching wedges typically lofted from 45 to 48 degrees, the gap wedge is so-called because it closes the “gap” in loft between the pitching wedge and sand wedge. A typical gap wedge might might be lofted from 50-54 degrees.

Loft: Put simply, loft is the angle at which the club hits the ball off the ground, typically somewhere between 47 and 64 degrees. Higher lofts equate to shots with greater elevation and reduced distance.

Bounce: This has to do with the club’s sole, and the amount of energy distributed between ground and club. Finding the best bounce for a wedge allows you to improve your chipping and pitching.

 

Putter

Every round of tournament, no matter how great you play,there is at least half of the score come from putting. No doubt about that, putting is the most important part of golf.

      Putter Type

The two basic types of putters are face- and toe-balanced. Face-balanced putters’ face turns upward, with a center of gravity in line with the shaft, and they’re well suited to players with a straight stroke. Toe-balanced putters, meanwhile, have a toe that points toward the ground, making them ideal for players with an “in-to-out-to-in” putting stroke.

      Head Design

There are three basic head design options: blade, perimeter weighted, and mallet.

Beginners Golf Clubs

Putter

Blade: A favorite of traditionalists, blade putters have a small head, classic design, and are a safe choice for any player.

Perimeter Weighted: A larger head is well suited to players with an “in-to-out” stroke.

Mallet: Heavier than a blade putter due to its larger size, mallet putters have a lower and deeper center of gravity to reduce backspin.

The selection of the club head shape is depend on what kind of alignment system you would like to use to help you aim and read the line. The purpose of all alignment system or putter is to help you to aim, and then you can putt on an accurate line.

      Faces and Inserts

The ideal putter face for your game depends largely on your preferred ball, and the speed of the greens you typically play on. The faster the greens, the softer your face and ball should be. Your three basic face options are metal, insert, and grooved:

Metal: Popular for the noise they provide, and traditionally made of steel, a metal face putter is strong and heavy, with responsive feedback and a solid feel.

Insert: Essentially a metal putter whose face has been replaced with a lightweight, non-metal insert, the
advantage of these putters is the lighter weight, with more of it distributed to the heel and toe for increased forgiveness. The downside is a lack of sound feedback on your putts.

Grooved: Finally, grooved face putters assist in creating a forward-rolling motion that keeps your ball on-line, as a result of the increased friction on the face of the clubhead.

      Hosel

Most putters have a steel shaft, but where the shafts meets the putter head is called the hosel and is where variety and option come into play:

Heel-shafted: Shaft connects putter at heel, or inside, of the head

Center-shafted: Shaft connects at the center of the putter head

Hosel offset: Hosel bends backward to move the bottom of the shaft ahead of the putter face, drawing your hands ahead of the ball through impact.

Hosel options are largely based on player preference, and the best way to determine the right choice for you is through good, old-fashioned trial and error.

 

Recommended Putter for beginner  Click Here!

Incoming search terms:

  • golf club loft chart
  • golf clubs
  • beginners golf clubs
  • golf club degree chart
  • golf club angle chart
  • standard lofts for golf clubs
  • golf club lie angle chart
  • golf club lofts chart
  • club loft chart
  • golf loft chart